Corrosion in the REACT exchangers and associated piping may be an issue if ammonium bisulfide levels are elevated, or if the presence of chlorides leads to the formation of ammonium chloride. Reliability demands corrosion control in this area; we provide solutions and strategies to minimise corrosives and their impacts.
Contact your Nalco Champion Representative today or Nalco Champion Customer Service
Tel: +91 265 2324238
We found no results!
Try your search again, but first:
Double-check your spelling
Try alternative or fewer keywords
Provide fewer search terms
A result of hydroprocessing reactions is the production of hydrogen sulfide and ammonia from contaminants removed from the hydrocarbon streams. As the effluent from the hydroprocess reactor is cooled through subsequent heat exchangers, the gas phase hydrogen sulfide, ammonia and chlorides (when present) will combine to form ammonium bisulfide and ammonium chloride. Where this occurs within the exchanger system depends on concentration and temperature. If deposits occur, under-deposit corrosion may take place.
In order to minimise this corrosion, refiners typically employ water wash strategies and system monitoring. With a high degree of contaminants, filming corrosion inhibitors can reduce corrosion to the process surface, and salt dispersant chemistry can minimise the potential for deposition in the system. The combination can help control corrosion in reactor effluent exchangers.